External multiband L1/L2/L5 Helix GNSS antenna, weighing less than 18 grams, ideal for light applications such as drones.
Good to know:
- Compatible with all simpleRTK2B boards and all other multiband GNSS receivers on the market.
- Helical antennas are ideal for GNSS reception in unusual situations (not always directed towards the sky).
- Integrates an SMA connector, no cable is needed, although you can use ArduSimple's cable extensions.
Be aware that if you want to use the Pixhawk connector in the simpleRTK2B board, the Helix antenna will block it, so you need a cable extension!
- Does not include the receiver
Antenna Frequency: GPS L1/L2
GLONASS: L1/L2
COMPASS: B1/B2/B3
Galileo: E5b/E6
Polarization: RHCP
Axial ratio: ≤3dB
V.S.W.R.: ≤2.0
Gain: 2dBi (Zenith)
Impedance: 50Ω
Horizontal coverage angle: 360°
LNA Gain: 33±2dB
Noise figure: ≤1.5dB
Passband fluctuation: ±2dB
Supply voltage: 3.0~16V DC
Current consumption: ≤35mA
V.S.W.R.: ≤2.0
Mechanical Connector: SMA
Environmental Operating temperature: -40?~+85?
Relative humidity Up to: 95%
Ingress protection: IP67
Vibration: 10 to 55Hz with 1.5mm amplitude 2 hours
Environmentally friendly: ROHS Compliant
| Shipping weight: | 0,03 Kg |
| Product weight: | 0,02 Kg |
