relay - 4
digital switching I/O channels - 8
analog input - 4
power supply - 12V DC adapter, sold separately.
configuration and test interface - HTTP (web page).
Control interface - TCP/IP over Ethernet.
Relay current - Up to 16Amp @24vdc or 250vac
Connections - Screw terminals for closing and common contacts.
Füfor remote control of this module free Android and iPhone apps are available.
overview
The ETH484 has four potential-free contact relay outputs with a rated current of up to 16 amperes each, 8 digital I/Os and 4 analog inputs. The module is powered by a 12Vdc supply, which can be regulated or unregulated. The DC input jack is 2.1mm positive core polarit, DC supplies are required to provide at least 500mA at 12vdc. The relays are type SPCO (Single Pole Change Over). A new feature has been added to allow digital inputs to remotely control relays or digital outputs to ETH002, ETH008, ETH484 or ETH8020. This provides the opportunity to design a system where one input can control one output anywhere on earth, provided both sites are connected to the network/internet.
Operating temperature
-40C to +70CLED
Display
The ETH484 has a red LED located next to each relay to indicate whether it is in an active state (LED on), and two LEDs are mounted in the Ethernet port that flash during Ethernet traffic. Finally, there is a green power LED directly above the processor.
| Shipping weight: | 0,30 Kg |
