If you need to generate a voltage between -10 and +10 volts, this board does the job.
With a resolution of 4.9 mV (12 bit) and a current of up to 5 mA, it is designed to interface with devices controlled by an analog voltage signal. To use it, simply connect it to a VINT connector and control the voltage with your program (see the Compatible Products tab for a list of VINT hubs). An event is also triggered if the actual output voltage deviates from the selected voltage (e.g. if the connected device consumes too much power). This Phidget is factory calibrated to ensure output accuracy.
Wäselectable voltage range
|Shipping weight:||0,10 Kg|