This NEMA 14 motor generates 1.4 Kg-cm holding torque at 1 ampere. It comes with the rear shaft exposed so you can mount an encoder or shaft coupling.
This motor must be controlled by a constant current or chopper drive controller. See the Connection & Compatibility tab for a list of suitable controllers. There you will also find compatible accessories such as encoders, mounting hardware and transmission hardware.
The direct connection of the motor to a power supply will destroy the motor and void the warranty. If you want to check your motor, make sure that it is connected to a constant current / chopper drive controller.
- Motor type Bipolar stepper motor
- Manufacturer part number 35STH40-1004B
- Step angle 1.8°.
- Step accuracy ± 5 %.
- Holding torque 1.4 kg-cm
- Nominal torque 1.2 kg-cm
- Maximum motor speed 2150 rpm.
- Recommended voltage 12 V DC 12 V DC
- Rated current 1 A
- Coil resistance 2.7 Ω
- Phase inductance 4.3 mH
>- Physical properties:
- Shaft diameter 5 mm
- Rear axle diameter 3.9 mm
- Mounting plate size NEMA - 14
- Weight 200 g
- Number of leads 4
- Wire length 300 mm
|Shipping weight:||0,30 Kg|
|Product weight:||0,20 Kg|