His NEMA 34 motor generates 34 kg-cm holding torque at 2.8 amps. It is supplied with the rear shaft exposed so that you can mount an encoder or shaft coupling.
This motor must be controlled by a constant current or chopper drive controller. See the Connection & Compatibility tab for a list of suitable controllers. You will also find compatible accessories such as encoders, mounting hardware and transmission hardware.
warning
br />The direct connection of the motor to a power supply will destroy the motor and void the warranty. If you want to check your motor, make sure it is connected to a constant current / chopper drive controller.
>This motor is large enough that the counter-EMK generated by pulling or changing direction can easily damage your motor control. If you are planning to use this motor in high-speed or high-torque applications, we will be happy to advise you.
Product specifications:
- Motor characteristics
- Motor type Bipolar stepper motor
- Manufacturer part number 86STH65-2808B
- Step angle 1.8°.
- Step accuracy ± 5 %.
- Holding torque 34 kg-cm
- Rated torque 30 kg-cm
- Maximum motor speed 200 rpm
>Electrical properties:
- Recommended voltage 30 V DC
- Coil resistance 1.4 Ω
- Rated current (series connection) 2 A
- Rated current (parallel wiring) 4 A
- Phase inductance 3.9 mH
- Physical properties:
- Shaft diameter 12 mm
- Rear axle diameter 3.9 mm
- Mounting plate size NEMA - 34
- Weight 1.8 kg
- Number of cables 8
- Wire length 400 mm
| Shipping weight: | 2,00 Kg |
| Product weight: | 1,80 Kg |
