Phidgets RCC1000_0 16x RC Servo Phidget - Control position, velocity and acceleration of 16 RC servos with one VINT port

The RC Servo Phidget can control up to 16 RC servo motors. This Phidget connects to your computer through a VINT Hub. - Control the position, velocity, and acceleration of each individual servo motor - Set the minimum and maximum pulse width for each servo, and the actual position values they correspond to in code. - Powered externally by an 8-30V supply - Provides a total of up to 20A of regulated power to its servos. - Control the regulator and choose a global voltage of 5.0V, 6.0V, or 7.4V. Technical Details: - Isolation - The VINT hub and the computer will be protected if anything goes wrong with your circuit - Polarity Protection - The device will not turn on and will not be damaged if the power supply is connected backward - Overcurrent Protection - Onboard fuse to protect the controller in an over-current event Board Properties Controlled By VINT Servo Controller Number of Motor Ports 16 Pulse Width Min 63 ns Pulse Width Max 4 ms Pulse Width Resolution 63 ns Pulse Code Period 20 ms Electrical Properties Supply Voltage Min 8 V DC Supply Voltage Max 30 V DC Output Motor Voltage 5 V DC Continuous Motor Current Max (Total) 20 A Selectable Output Voltage Levels 5.0, 6.0, 7.4 VDC Current Consumption Max 20 A Current Consumption Min 10 mA Output Impedance (Motor) 100 O Physical Properties Recommended Wire Size 12 - 24 AWG Operating Temperature Min -40 °C Operating Temperature Max 85 °C