Profitieren Sie von unseren Schul-/Behörden Rabatten
Pololu 120:1 Mini plastic gear motor, 90° 2mm spline shaft output, 120U/min, 80mA, 4,5V

Item number: PO-1123

EAN: 4251326833834

This compact brushed DC motor with a 120:1 reduction gear is well suited for use in small robots.

Category: Motors, Actuators & Servos


11,79 €

including 19% VAT. , plus shipping (Standard)

From Price per unit
10 8,49 €
Available now!

Shipping time: 6 - 7 workdays

 


This rugged DC geared motor is very compact and weighs only 19.5 grams (0.7 ounces) - perfect for building a fast miniature robot. They are intended for use at 4.5 V, although these types of motors can generally operate at voltages above and below this rated voltage, so they should operate comfortably in the range from 3 V to 6 V (rotation can start at voltages up to 0.6 V). Lower voltages may not be practicable and higher voltages may have a negative effect on the life of the motor. The plastic gear is supported by a built-in safety clutch that typically slips before the gearing can shear (typically when the load exceeds about 25 oz-in or 2 kg-cm).

Dimensions
- Size: 54.5 x 20 x 13.8 mm
- Weight: 19 g
- Shaft diameter: 2 mm

General specifications:
- Shaft type:    90° 2mm toothing
- Typical operating voltage: 4.5 V
- Ratio: 120:1
- No-load speed at 4.5 V: 120 rpm.
- No-load current at 4.5V: 80 mA
- Stall current at 4.5V: 800 mA
- Stall torque at 4.5V: 20 oz-in
- Longer motor shaft?:     N


Shipping weight: 0,02 Kg
Product weight: 0,01 Kg