This 120:1 plastic gear motor (gear with Brushed DC motor) is a cost-effective alternative to modified hobby servos or Tamiya gears. The low current motor is the perfect complement to our qik 2s9v1 Dual Serial Motor Controller, Baby Orangutan Robot Controller or DRV8833 Dual Motor Driver Carrier, and the compact size makes this unit an attractive choice for small robot designs. The recommended operating voltage range for this motor is 3 V to 12 V.
This is a version of the 228:1 plastic geared motor with lower torque and higher speed. At 6 V, the gearbox and motor deliver about 75 oz-in torque and 85 rpm. The freewheel current is 70 mA and the standstill current 800 mA. The gear is supported by a built-in safety clutch that typically slips before the gearing can shear.
This gear motor is supplied pre-assembled, fully enclosed with the gear teeth, and the output shaft is 6 mm long and 7 mm in diameter, with two sides flattened. The output shaft is along the same axis as the motor shaft, but offset; we also sell a version of this geared motor with a 90° output shaft.
Dimensions:
- Size: 42 x 22.7 x 47.8 mm
- Weight: 33 g
- Shaft diameter: 7 mm
General specifications:
- Typical operating voltage: 6 V
- Ratio: 120:1
- No-load speed at 6V: 85 rpm.
- No-load current at 6V: 70 mA
- Stall current at 6V: 800 mA
- Stall torque at 6V: 75 oz-in
| Shipping weight: | 0,02 Kg |
| Product weight: | 0,01 Kg |
