The compact D24V10F12 synchronous voltage regulator accepts an input voltage of up to 36 V and efficiently reduces it to 12 V, with a maximum output current of 1 A being possible. This regulator offers typical efficiencies between 85% and 5%. It is 93% and has a very low dropout. Therefore, it can be used with input voltages of several hundred millivolts over 12V. The pens are 0.1 inch (0.1 inch) apart, making this board compatible with seamless breadboards and perfboards. P>
The D24V10Fx family of step-down voltage regulators features the Intersil ISL85410 1A synchronous buck regulator, and generates lower output voltages from input voltages up to 36V. These are switching regulators (SMPS) or DC-to-DC converters) with typical efficiencies between 80% and 95%, which is much more efficient than linear voltage regulators, especially when the difference between input and output voltages is large. is. These regulators have an energy-saving mode, which is activated at low loads and at a low quiescent current (no load), making them suitable for applications powered by a battery. P>
& nbsp; p>
Features
- Input Voltage: [Output Voltage + Dropout Voltage] up to 36V (see below for more information on dropout voltage)
- Fixed 3.3V, 5V , 6 V, 9 V or 12 V output (depending on controller version) with 4% accuracy
- Maximum output current: 1 A
- Typical efficiency of 80% to 93%
- 500 kHz switching frequency (if not in energy-saving mode)
- 2 ms Soft start reduces inrush current at power on
- 200 A typical no-load quiescent current
- Integrated overheat and overcurrent shutdown < br /> - Small size: 18 mm x? 13mm x 10mm 3.5mm p>
| Shipping weight: | 0,01 Kg |
