Profitieren Sie von unseren Schul-/Behörden Rabatten
Pololu 150:1 Micrometal gear motor HP 6V, miniature DC motor, 210rpm, 70mA

Item number: PO-997

EAN: 4251326832011

This geared motor is a miniature high-performance DC motor with 6 V brush and a metal gear 150.58:1.

Category: Motors, Actuators & Servos


18,46 €

including 19% VAT. , plus shipping (Standard)

Available now!

Shipping time: 2 - 3 workdays

 


&ruml;overview

These tiny DC gearmotors with rust are available in a wide range of ratios from 5:1 to 1000:1 and with five different motors: Powerful 6 V and 12 V motors with long-life carbon rust (HPCB) and powerful (HP), medium power (MP) and low power (LP) 6 V motors with long-life precious metal rust. The 6 V and 12 V HPCB motors offer the same power at their respective rated voltages, with the 12 V motor consuming only half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical, with the exception of their Bürsten, which only affect the life of the motor.

With the exception of the 1000:1 gear versions, all micrometal gearmotors have the same physical dimensions, so one version can be easily replaced by another when your design requirements change.

Note: Overtightening or overloading gearmotors can greatly shorten their service life and even lead to immediate damage. The recommended upper limit for the instantaneous torque is 2.5 kg-cm (35 oz-in) for the 380:1 and 1000:1 gear units and 2 kg-cm (25 oz-in) for all other ratios; we strongly recommend keeping the applied loads well below this limit. A standstill may also result in rapid (possibly in seconds) thermal damage to the motor windings and Bürsten, especially in the high power motor versions (HP and HPCB); a general recommendation for the operation of a DC motor with a standstill current is 25% or less of the standstill current.


Shipping weight: 0,02 Kg
Product weight: 0,01 Kg