Profitieren Sie von unseren Schul-/Behörden Rabatten
Pololu 180:1 Mini plastic gear motor, 3mm offset, D-shaft output, 80U/min, 80mA, 4,5V

Item number: PO-1594

EAN: 4251326833803

This compact plastic geared motor with a 180:1 reduction gear is well suited for use in small robots.

Category: Motors, Actuators & Servos


11,79 €

including 19% VAT. , plus shipping (Standard)

From Price per unit
10 8,99 €
Available now!

Shipping time: 7 - 8 workdays

 


&ruml;overview

These DC gearmotors with rust are compact and inexpensive - perfect for building a fast miniature robot. They are designed for use at 4.5 V, although these types of motors can generally operate at voltages above and below this rated voltage, so they should operate comfortably in the 3 V to 6 V range (rotation can start at voltages as low as 0.5 V). Lower voltages may not be practicable and higher voltages may have a negative effect on the life of the motor. The plastic gear is supported by a built-in safety clutch that typically slips before the gearing can shear (typically when the load exceeds about 25 oz-in or 2 kg-cm).

>Dimensions:
- Size: 36.5 x 20 x 27.4 mm
- Weight: 19 g
- Shaft diameter: 3 mm

General specifications:
- Shaft type: Offset 3mm D
- Typical operating voltage: 4.5 V
- Ratio: 180:1
- No-load speed at 4.5 V: 80 rpm.
- No-load current at 4.5 V: 80 mA
- Stall current at 4.5 V: 800 mA
- Stall torque at 4.5 V: 30 oz-in
- Longer motor shaft?:     N


Shipping weight: 0,02 Kg
Product weight: 0,01 Kg