Profitieren Sie von unseren Schul-/Behörden Rabatten
Pololu 20.4:1 Metal geared motor LP 6V with 48 CPR Encoder (without end cap) 290U/min, 250mA, 2,4A

Item number: PO-2283

EAN: 4251326832417

This geared motor consists of a 6 V brushed DC motor in combination with a 20.4:1 metal spur gear and 48 CPR encoders.

Category: Motors, Actuators & Servos

41,02 €

including 19% VAT. , plus shipping (DPD)

Available now!

Shipping time: 2 - 3 workdays


These cylindrical DC geared motors with rust are available in a wide range of ratios and with five different motors (two power ratings of 6 V motors and three power ratings of 12 V motors). The gearmotors all have the same 25mm diameter housing and 4mm diameter output shaft, so it is generally easy to replace one version with another when your design requirements change (although the length of the gearbox tends to increase with the ratio).

Note: Overtightening or overloading gearmotors can greatly shorten their service life and even result in immediate damage.

Warning: Do not screw too far into the mounting holes as the screws may hit the teeth. We recommend that you do not screw more than 6 mm into the screw hole.

- Größe: 25D x 62L mm1
- Weight: 98 g
- Shaft diameter: 4 mm

>General specifications:
- Ratio: 20.4:1
- Idle speed at 6V: 290 rpm.
- No-load current at 6V: 250 mA
- Breaking current at 6V: 2400 mA
- Standstill torque at 6V: 33 oz-in
- Motor type: 2.4A &>- Overload at 6V (LP 6V)
- Cable lengths: 8 in2
- Encoder?    Y

Shipping weight: 0,20 Kg
Product weight: 0,10 Kg