Profitieren Sie von unseren Schul-/Behörden Rabatten
Pololu 210:1 Micrometal gear motor HP 6V, miniature DC motor, 150U/min, 70mA, 6V

Item number: PO-996

EAN: 4251326834022

This geared motor is a miniature high performance DC motor with 6 V brush and a metal gear 210.59:1.

Category: Motors, Actuators & Servos

17,43 €

including 19% VAT. , plus shipping (Standard)

Short supply

Shipping time: 2 - 3 workdays



These tiny DC gearmotors with rust are available in a wide range of ratios from 5:1 to 1000:1 and with five different motors: Powerful 6 V and 12 V motors with long-life carbon rust (HPCB) and powerful (HP), medium power (MP) and low power (LP) 6 V motors with long-life precious metal rust. The 6 V and 12 V HPCB motors offer the same power at their respective rated voltages, with the 12 V motor consuming only half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical, with the exception of their Bürsten, which only affect the life of the motor.

With the exception of the 1000:1 gear versions, all micrometal gearmotors have the same physical dimensions, so one version can be easily replaced by another when your design requirements change.

Note: Overtightening or overloading gearmotors can greatly shorten their service life and even result in immediate damage.

- Größe: 10 × 12 × 26 mm
- Weight: 9,5 g
- Shaft diameter: 3 mm

General specifications:
- Ratio: 210,59:1
- Idle speed at 6V: 150 rpm.
- No-load current at 6V: 0.07 A
- Standstill current at 6V: 1.6 A
- Standstill torque at 6V: 3.0 kg-cm
- Maximum output power at 6V: 1.1 W
- Longer motor shaft?:     N
- Motor type:      1.6A Stall at 6V (HP 6V)

Power at maximum efficiency:
- Maximum efficiency at 6V: 32 %.
- Speed at maximum efficiency: 120 rpm.
- Torque at maximum efficiency: 0.50 kg-cm
- Current at maximum efficiency: 0.32 A
- Output power at maximum efficiency: 0.62 W

Shipping weight: 0,02 Kg
Product weight: 0,01 Kg