This hybrid bipolar stepper motor has a step angle of 1.8° (200 steps/revolution). Each phase draws 670 mA at 3.8 V and provides a holding torque of 600 g-cm (8.3 oz-in). The motor has four color-coded wires terminated with bare wires: Black and green connect to one coil, red and blue to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend the use of a bipolar stepper motor driver or one of our Tic stepper motor controllers. In particular, the tics make the controller simple, since they support six different interfaces (USB, TTL serial, I²C, RC, analog voltages and quadrature encoders) and can be configured via USB with our free configuration program.
Dimensions:
- Size: 28 mm square × 32 mm
- NEMA size: 11
- Weight: 110 g
- Shaft diameter: 5 mm
- General specifications:
- Shaft type: 5 mm "D" (5 mm)
- Rated current: 670 mA
- Rated voltage: 3.8 V
- Holding torque: 8.3 oz-in
- Steps per revolution: 200
- Resistance: 5.6 Ohm
- Inductance per phase: 4.2 mH
- Number of lines: 4
- Cable lengths: 30 cm
| Shipping weight: | 0,20 Kg |
| Product weight: | 0,10 Kg |
