>Overview
>These cylindrical rust DC geared motors are available in a wide range of ratios and with five different motors (two power ratings of 6 V motors and three power ratings of 12 V motors). The gearmotors all have the same 25mm diameter housing and 4mm diameter output shaft, so it is generally easy to replace one version with another when your design requirements change (although the length of the gearbox tends to increase with the gear ratio).
Note: Overtightening or overloading gearmotors can greatly shorten their service life and even result in immediate damage.
Warning: Do not screw too far into the mounting holes as the screws may hit the teeth. We recommend not screwing more than 6 mm into the screw hole.
Dimensions:
- Size: 25D x 52L mm
- Weight: 88 g
- Shaft diameter: 4 mm
- General specifications:
- Ratio: 46.85:1
- Idle speed at 6V: 200 rpm.
- No-load current at 6V: 550 mA
- Cut-off current at 6V: 6500 mA
- Stall torque at 6V: 115 oz-in
- Motor type: 6.5A Stall at 6V (HP 6V)
- Encoder? N
| Shipping weight: | 0,20 Kg |
| Product weight: | 0,10 Kg |
