>Overview
>With Pololu base relay modules it is easy to control a single pole, two stage (SPDT) switch from low voltage and low current control signals. The modules are available with 5 V and 12 V power relays and they are available pre-wired or partial, allowing greater application flexibility.
>The carrier board leads the three relay control pins to 0.1" spaced pins, which are compatible with commercially available, lossless breadboards and servo cable sockets. The best version of this board has a 0.1" straight pin header that is extended with these pins, while the 8" straight and right-angled part kit version includes 0.1" straight and right-angled pin headers that can be optionally broken and inserted in 3×1 pieces. The relay switching pins are mounted on a set of large pads intended for use with a 5 mm pitch 3-pole terminal strip and a set of smaller pads spaced 0.2" apart, making them compatible with 0.1" perfboards. The best version of this board has a terminal block that is extended with these pins, while the part kit version includes a 3-pin terminal block that can be optionally inserted. The carrier board has four mounting holes which work with screws #2 or M2.
Dimensions
Grö&scale: 2.5cm x 3cm x 2.3cm x 2.3cm
Weight: 16 g
General specifications
Voltage: 12 V
| Shipping weight: | 0,01 Kg |
