This Futaba J-plug has a pin spacing of 0.1" and fits the sockets of many Futaba servos. It is coded to force the correct cable alignment when used with an appropriate Futaba J socket, and it is also compatible with JR sockets that are not coded. This package includes three female JR cases, three male Futaba J-shrouds and two gold-plated crimp contacts, enough for three complete plugs and three spare pins. The crimp pins are designed for 22-26 AWG wires, and we sell a crimp tool that goes well with them. You can use these connectors to make your own custom servo cables or servo extension cables.
To assemble the connectors, slide the crimped pins into the receptacle housing until you hear them snap into place (the pins protrude from the receptacles), and then slide this assembly without the Futaba key;The Futaba keyway should be inserted into the housing bore so that the side of the receptacle housing with the crimp mandrels facing the inside of the housing is facing the side of the housing. If you've done things right, hear a snapshot when you slide the woman's walk into the Gehl;use, and it snaps into place. Note that if you need a cable that can be plugged into a breadboard rather than a JR connector, you can omit the cover.
Gender: mänlich
Conductor cross-section: 22-26 AWG
Connection: Futaba J
Shipping weight: | 0,01 Kg |