This tiny carrier board makes it easy to integrate a Sharp GP2Y0D815Z0F, GP2Y0D810Z0F or GP2Y0D805Z0F digital distance sensor into your project by providing all the necessary external components, an initial status LED and a 0.1″ pitch, three-pin interface to the sensor.
Overview
The GP2Y0D805, GP2Y0D810, and GP2Y0D815 are Sharp's smallest and fastest distance sensors, and this tiny carrier board for these sensors contains all the external components needed for them to work. With acquisition distances of up to 150 mm and a typical sampling rate of nearly 400 Hz, these sensors offer an attractive alternative to shorter LED phototransistor reflection pairs and longer range but slower sensors such as the Sharp GP2Y0A41SK0F analog distance sensor.
However, these sensors require external components and have a non-standard 1.5 mm pitch, which can make them difficult to integrate into projects with a 0.1 mm pitch. This board contains these components and has a three-pole interface with a pitch of 0.1″: mass, power and output.
| Shipping weight: | 0,01 Kg |
