The Robotis Li-Po battery pack set is designed for the Darwin robot. A PCM was embedded in the Li-Po battery pack set. This has the functions to protect the Li-Po battery pack set from overload, overdischarge and overcurrent.
Please note the warnings below when using the Li-Po battery set!
Scope of supply
1 LIPO 11.1V Battery pack set LB-012
1 Battery cover
1 F60
1 Cable-BAT
H/W Specification
Voltage: 11.1V
Capacity: 1800 mAh
Discharge: 10C
Dimension: 88 x 35 x 26
Weight: 106g
PCM embedded to protect against overcharging, overdischarging and overcurrent />
Warning
Avoid folding or dropping parts of the battery.
Avoid folding the ends of the generated parts.
Avoid heat, water, or other liquids on the battery.
Avoid placing the battery in the microwave, washing machine, or dryer.
Avoid using damaged batteries (damaged by bloating, deformation, etc.).).
Avoid short-circuiting the polarites.
Avoid disassembling the battery.
When charging the battery, make sure the battery is connected to the correct poles.
Avoid charging the battery when it is hot. Wait until the battery is cooled.
If you are not using the battery, please disassemble the battery into its components.
The battery will not be charged if it is connected to a robot.
Storage precautions
Löre the battery of robot or controller when the battery is stored.
When storing the battery for a longer period of time, be sure to keep the battery life at about 50%.
Avoid storing the battery in wet or hot places.
Shipping weight: | 0,40 Kg |
Product weight: | 0,30 Kg |