The 6-fold AX/MX Power Hub is a must for every DYNAMIXEL user. This small board is a Bioloid 6 port hub and an SMPS adapter in one!
The DYNAMIXEL communication bus allows you to chain multiple servos, making wiring child's play. Sometimes, however, you need to split your DYNAMIXEL chain in several directions. Simply connect a 3-pin dynamo cable from your controller to any port on the hub, and you have 5 ports available for DYNAMIXEL servos.
This hub has the added benefit of 2 power failures. You can insert bare wire with the screw terminal block or connect the power supply via the DC cylinder bushing. The 2.1 x 5.5 socket accepts all our SMPS power supplies and battery wiring harness.
>The AX/MX Power Hub is compatible with the following DYNAMIXEL servos:
- AX-12A
- AX-18A
- AX-12W
- MX-28T
- MX-64T*
- MX-106T*
>>This hub is NOT compatible with the 4-pole RX and EX series of DYNAMIXEL servos.
This hub is NOT compatible with the 3-pole XM430 or XL430 series DYNAMIXEL servos.
* Under certain circumstances, these servos may switch off the power to switching power supplies. If you are using these servos with an SMPS, we recommend that you also use the SMPS2DYNAMIXEL.
| Shipping weight: | 0,02 Kg |
| Product weight: | 0,01 Kg |
