The Phidgets Wi-Fi USB Adapter with SMA Antenna allows you to connect the Phidgets Single Board Computer to a wireless network. The manufacturer recommends the PhidgetSBC3.
The wireless USB adapter comes with a removable antenna and is fully compatible with the 802.11b/g wireless communication standard. The manufacturer Phidgets has conducted several throughput tests with the Wi-Fi USB adapter with SMA antenna, which works with the PhidgetSBC3. The tests were performed with the network test tool Iperf. An average data rate of 4.17 Mbps was found at a range of approximately 10 meters through the wilderness of the Büro. The throughput depends on several variables such as the performance of the computer running the Wi-Fi USB adapter and the operating system used. More information about the throughput test can be found on the manufacturer's website.
The SMA antenna of the Wi-Fi USB adapter is a compact 2.4 GHz omnidirectional Wi-Fi antenna that provides wide coverage and 3 dBi gain. The antenna has a co-axial Hül design with omnidirectional patterns.
The flexible antenna features an SMA connector with tiltable polarity reversal, allowing the Wi-Fi adapter to be used vertically, at right angles, or at any angle in between.
Scope of delivery:
One Wi-Fi USB Adapter with SMA Antenna
One Wi-Fi Adapter Dongle
One RP-AMA Antenna
One USB Extension Cable (30 cm)
Specifications:
Antenna:
Wireless communication standard: IEEE802.11b/g
Communication frequency: 2.4 Ghz
Antenna amplification: 3 dBi
Maximum transmission power: 15 dBm (31.6 mW)
Maximum transmission range (loud environment): 30 m
Maximum transmission range (optimum environment): 200 m
USB adapter:
I/O communication protocol: USB 2.0/1.1
average data rate: 4.2 MBit/s
maximum power consumption: 200 mA
Physical properties:
Material: Thermoplastic polyurethane
Minimum operating temperature: -20°C
Maximum operating temperature: 60°C
Connection A: USB connector A
Connection B: RP SMA jack
Weightness: 9,6 g
| Shipping weight: | 0,03 Kg |
| Product weight: | 0,02 Kg |
